Making of A Soap Dish March 18, 2018 Measure 45 mm and make the first straight cut. Now turn the saw under 45 degrees and cut the one edge of the piece of soap dish. It will be 15 mm. Now cut the second half of the dish piece. The piece you just have cut should look like this.c0c79d4e3541c3c0fba9f4d6e35cbce9f40bbcb017a7fcd3df Make yourself a comfortable sanding table by using the stapler. Sand using sandpaper with the grit of 120. Be sure you will not sand the corners, it should remain sharp. Glue 6 pieces together into a pair of lace screw. Let the glue dry for few hours or as long as the manufacturer tells. Now clean carefully using the chisel. Sand again, using the sand paper with the grit of 120. Sand under the Soap dish and be careful not to loose the shape of the soap dish. This should remain straight. Polish with wood polisher. Let it dry and repeat after sanding with sanding paper with the grit of 120.